precision grouts

Aquapoxy-EG III is three component epoxy resin grout. This is specially formulated for application of grouts where high strength and chemical resistance is required. This can be used for grouting gap width between 50-75 mm. The 3 part system consists of epoxy resin, hardener and graded aggregates.

An admixture for cementitious grouts where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. shrinkage and settlement in properly designed cementitious grout.

Aquacrete-Insta-Plus is a fast instant leak plugging compound. It is ideal for instantaneous sealing of leaks and plugging wet cracks in concrete and masonry surface. It is particularly designed to stop the flow of running water.

Aquagrout-Anchor Set-400 resin cartridges contains very high quality resin and its catalyst in precisely measured quantities. These two components are kept separate i.e. the catalyst is separated from the resin by an inner tube.The outer skin contains the resin and the inner tube filled with catalyst, basically floats in the encapsulated resin. The sausage shaped cartridges are designed to be inserted into the drill holes for the purpose of mining or tunnelling. The rotating bolt during insertion, punctures the outer skin of the cartridge and breaks the inner tube filled with catalyst and thus ensuring a homogeneous mixing of the catalyst and the resin. The resin catalyst mix fills the annular space between the bolt and the bore hole and holds the bolt firmly and permanently.

We are an acclaimed name engaged in offering our precious clients a superior quality range of High Strength Non Shrink Grout which gives high grout fluidity with Iow water / cement ratio. The offered grouts are accurately processed as per the industrial norms using optimum quality ingredients. Provided grouts are the fine powder therefore No blockage / breakdown of grouting pumps. Our quality controllers test these grouts as per the set quality norms to ensure purity.

Precision Grout is specially formulated for critical grouting operation where high strength, high tolerance and fluidity are required. It comprises of hydraulic setting binders. select grade fillers and expansion control additives, needs only addition of requisite quantity of water at site.

Fine Cement Grout is a specially formulated cementitious shrinkage compensation precision grout, design for pressure grouting / rehabilitation of stone masonry / concrete bridges, tunnels, dams, pre & post tension sections and other major structures, where ordinary cement grouts are not sufficient and epoxy grouts are expensive.

Aqyapoxy-Tile Mate is a stainless, chemical resistant, hard wearing & impervious tile joint filler with a high degree of resistance to abrasion and impact. Aqyapoxy-Tile Mate can also be used as a high performance epoxy adhesive for fixing ceramic/vitrified tiles.