Products

Aquaplast - WPL is an integral liquid waterproofing admixture for concrete and cement mortar. It has good plasticising properties, makes concrete cohesive and prevents segregation. The liquid is to be added to wet concrete or mortar. The product conforms to IS : 2645-1975 as an 'Integral Waterproofing Admixture'. It fills up the capillaries in the concrete giving effective waterproofing.

Nanoseal is a Clear single component Water Based free flowing liquid developed specially for a waterproofing of very difficult areas, where in other waterproofing systems cannot be implemented. Nanoseal is ready to use material available in white turbid color, which deep penetrates in to the pores. It dries to a clear and tough film which gives high quality waterproofing.

It can be poured on the areas of terraces where in normal case waterproofing is difficult. It can be applied on terraces where already china chips are fixed. It fills the joints on the china chips and forms a hard and tough transparent film. It can be applied on the parapet walls by brushing. It can be applied on bricks as well as on stone walls. It can be applied on building exterior walls on the painted surface to provide extra gloss and water proofing of the walls.

We are engaged in offering Hydrophobic Spray.

KEM PROOF IWP is a powder integral waterproofing compound for concrete and mortar, forms an internal barrier against water penetration, also increases the workability of mortar, reduces water absorption and thereby protect against freeze-thaw effect.

Aquacrete-BA is acrylic polymer specially designed for use as an admixture for cementitious mortar and concrete to improve the bonding, flexibility and workability. It can also be used as a bonding coat in combination with cement for increasing the bond coat between new concrete to old conctete, plaster repairs and screeds.

BONDING AGENT FOR OLD TO NEW CONCRETE

Aquacure Curing Compound is a white pigmented synthetic wax emulsion based concrete curing compound. On drying, it forms a temporary membrane, which allows the concrete to retain sufficient water for optimum curing. This economical and efficient curing membrane eliminates the need for keeping concrete continuously wet for minimum 28 days. The white pigment reflects the light and heat of sun and minimises the chance of cracking of the surfaces.

Aquacrete Micro Con is Supplied as a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. This is a cementitious material, with additives which impart controlled expansion characteristics in the plastic state whileminimising water demand. This is specially designed for repairs to damaged reinforced elements, particularly where areas is restricted and where vibration of the placed material is difficult or impossible.

Aquacrete Repari On is a polymer modified cement based, ready mixed dry mortar for thin layer concrete and masonry repairs. This product is designed for trowel applied easy repairs of concrete surfaces both for interior and exterior.

Aquacrete-Micro-Con is Supplied as a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. This is a cementitious material, with additives which impart controlled expansion characteristics in the plastic state whileminimising water demand. This is specially designed for repairs to damaged reinforced elements, particularly where areas is restricted and where vibration of the placed material is difficult or impossible.

Aquatech - Foam Concrete is an unique foaming agent for producing lightweight concrete which can be used as a roof insulating material and for production of light weight precast blocks, density varying between 320-2080 kg/m3 Aquatech - Foam Concrete has been specially developed to provide the maximum thermal insulating effect.